Activate the AMG menu on the car, and customize it to show Water and Gearbox temperatures

It is possible to customize it with a 280km/h, 300km/h, 330km/h or 360km/h speed dial.

The coding procedure takes 5 minutes.

Please note that flashing the unit might be needed.

If that is the case, a DoIP compatible VCI is required.

Going through the flashing procedure might be a bit more challenging, for most users, as you will also need to have DTS Monaco installed and configured.

The needed flash files are included and provided.

Installation and configuration of DTS Monaco is optionally provided by our individual partners, on request.

Update your Mercedes Navigation to the latest version.

The update procedure takes about 1 hour.

After buying, please generate your activation key from the Map Pin Codes page.

Display the AMG or Maybach boot logo on your headunit.

This is a headunit coding, and comes together with all the other headunit codings (meaning you don't need to purchase each of them individually, they are all included in the price).

Please do not confuse this with the AMG menu on your instrument cluster, that needs to be bought and coded separately!

When you enable this, the car will no longer use the integrated Internet provider.

Instead it will give you the possibility of tethering the internet from the shared connection of your phone.

If your phone has good signal, and has access to 5G network, the connection will be much faster and much more stable, because these cars can only get signals from 4G networks.

This is a headunit coding, and comes together with all the other headunit codings (meaning you don't need to purchase each of them individually, they are all included in the price).

Please notice that this feature will not work with imported cars.

Enabling the hotspot functionality will not inherently enable the Mercedes ME integration if your car doesn't support it, and neither the OTA firmware updates from Mercedes Server.

If the internet does not normally work on your car, enabling this will not bypass that restriction.

Modify the Radio Frequency, select between USA, EU, Japan, Australia, China, South America frequencies

This is a headunit coding, and comes together with all the other headunit codings (meaning you don't need to purchase each of them individually, they are all included in the price).

This activation is included free of charge for paying users.

The Start/Stop feature has been originally implemented to save fuel, however, over time, people reported that they started having premature battery and engine wear problems because of it.

This feature will let you save the Last Mode of the Start/Stop functionality. This means that the Start/Stop functionality will keep the status even after turning the car off then on again.

Please note that this included coding comes 'as is', with no support. Make sure to manually backup your codings in the MBTools app, should you want to revert back to it later.