How to Enable SEAT Remote Mirror Folding Using VCDS

Remote folding mirrors are a convenient feature that allows you to fold or unfold your SEAT Leon’s side mirrors using the key fob. If your car is equipped with power-folding mirrors but the feature is not activated, you can enable it using VCDS (VAG-COM Diagnostic System). This guide will walk you through the step-by-step process to activate SEAT remote mirror folding using VCDS.

Why Enable Remote Mirror Folding?

• Convenience: Fold mirrors automatically when locking/unlocking your car.
• Protection: Prevents accidental damage to the mirrors when parked.
• Customization: Enables a factory feature that may not be activated by default.

Required Tools

Before starting, make sure you have the following:

• VCDS Software & VAG-COM Interface (VCI) – A diagnostic tool compatible with SEAT vehicles.
• A laptop with VCDS installed.
• OBD-II connection cable – To connect your laptop to the vehicle.
• Stable power supply – To avoid any interruptions during coding.

Step-by-Step Guide to Activating SEAT Remote Mirror Folding

Step 1: Connect VCDS to the Car

1. Turn on the ignition (engine off but electronics powered).
2. Connect the VAG-COM Interface (VCI) to the OBD-II port in your SEAT Leon.
3. Launch VCDS software on your laptop and allow it to read the vehicle’s data.
4. Go to the “Select Control Module” menu.

Step 2: Access Driver-Side Mirror Module

1. Navigate to “42-Door Elect, Driver” module.
2. Select “Coding 07” to enter the coding section.
3. Click on “Coding Helper” to open the advanced options.
4. Locate “Bit 4: Folding Mirrors Installed” and activate it.

Step 3: Repeat for Passenger-Side Mirror Module

1. Go back to the module selection screen.
2. Select “52-Door Elect, Pass” (Passenger-side mirror module).
3. Again, go to “Coding 07” → “Coding Helper”.
4. Enable “Bit 4: Folding Mirrors Installed” for the passenger mirror.

Step 4: Confirm Coding & Test the Feature

1. Once both modules are updated, save the changes.
2. VCDS will show “Coding Accepted”, meaning the function is now active.
3. Exit VCDS and turn off the ignition.
4. Test the remote mirror folding:
   • Lock the car using the key fob → Mirrors should fold automatically.
   • Unlock the car → Mirrors should unfold.

Common Issues & Troubleshooting

1. VCDS Does Not Recognize the Car

• Ensure the OBD-II connector is properly plugged in.
• Check if the correct COM port is selected in VCDS settings.
• Restart VCDS and try again.

2. Coding Changes Not Saved

• Try saving the coding again and ensure Bit 4 is activated.
• Some models may require an ignition cycle before changes take effect.

3. Mirrors Do Not Fold After Activation

• Verify if your SEAT Leon is equipped with power-folding mirrors.
• Check the car’s settings to ensure mirror folding is enabled in the infotainment system.
• Perform a hard reset by disconnecting the battery for a few minutes.

Why Choose AutoExplain for SEAT Diagnostics & Coding?

Activating SEAT remote mirror folding and other advanced features requires professional knowledge and tools. If you need expert assistance with SEAT diagnostics, coding, programming, or troubleshooting, AutoExplain is here to help.

Our Services Include:

✅ Professional car diagnostics for SEAT, VW, Audi, and more.
✅ ECU & module coding and programming.
✅ Remote coding support for workshops and independent technicians worldwide.
✅ Error code troubleshooting and custom feature activation.

📞 Contact us today via WhatsApp: +84967469410 for expert automotive solutions!

Conclusion

Activating remote mirror folding on SEAT Leon using VCDS is a simple process that enhances both convenience and safety. By following the steps outlined in this guide, you can successfully enable this function and enjoy an upgraded driving experience.

For professional diagnostic and coding services, trust AutoExplain! We provide high-quality support to ensure your vehicle performs at its best.
👉 Get in touch with us today for expert automotive coding solutions! 🚗💡