How to Activate Cornering Lights with VCDS for SEAT Leon

Cornering lights are a useful feature that enhances visibility when making turns, providing better illumination of the road edges. If your SEAT Leon has front fog lights, you can enable them as cornering lights using VCDS (VAG-COM Diagnostic System). This guide will walk you through the step-by-step process of activating cornering lights via fog lights with VCDS.

Required Tools 

Before starting, ensure you have the following:

• VCDS Software & VAG-COM Interface (VCI) – Required for coding modifications.
• A laptop with VCDS installed.
• OBD-II connection cable – To connect your laptop to the vehicle.
• Stable power supply – To prevent interruptions during coding.

Step-by-Step Guide to Activating Cornering Lights on SEAT Leon

Step 1: Connect VCDS to the Vehicle

1. Turn on the ignition (engine off but electronics powered).
2. Plug the VAG-COM Interface (VCI) into the OBD-II port of your SEAT Leon.
3. Open the VCDS software on your laptop and allow it to detect the vehicle.
4. Navigate to the “Select Control Module” menu.

Step 2: Access Central Electronics Module

1. Choose “09-Cent. Elect.” to enter the central electronics module.
2. Click “Coding-07” to access the coding options.
3. Select “Long Coding Helper” for advanced settings.

Step 3: Enable Cornering Lights via Fog Lights

1. Locate Byte 03 in the long coding options.
2. Find Bit 7 and mark the option “Cornering lights via Front Fog Lights active”.
3. Close the window and click “Do it“.

Step 4: Confirm Coding and Test the Function

1. Once coding is completed, exit VCDS and turn off the ignition.
2. Start the car and test the cornering lights:
   • Turn the steering wheel left or right at low speeds.
   • The corresponding fog light should turn on automatically to illuminate the corner.

Common Issues & Troubleshooting

1. VCDS Does Not Recognize the Car

• Ensure the OBD-II connector is firmly plugged in.
• Check if the correct COM port is selected in VCDS settings.
• Restart the software and try again.

2. Coding Changes Not Saved

• Ensure you have administrator privileges on your laptop.
• Some models require an ignition cycle before changes take effect.
• Retry the process and confirm the changes were properly saved.

3. Cornering Lights Not Working After Activation

• Make sure your SEAT Leon has front fog lights installed.
• Check the vehicle’s lighting settings in the infotainment system.
• Perform a hard reset by disconnecting the battery for a few minutes.

Why Choose AutoExplain for SEAT Diagnostics & Coding?

Activating cornering lights via fog lights and other advanced features requires professional knowledge and tools. If you need expert assistance with SEAT diagnostics, coding, programming, or troubleshooting, AutoExplain is here to help.

Our Services Include:

✅ Professional car diagnostics for SEAT, VW, Audi, and more.
✅ ECU & module coding and programming.
✅ Remote coding support for workshops and independent technicians worldwide.
✅ Error code troubleshooting and custom feature activation.

📞 Contact us today via WhatsApp: +84967469410 for expert automotive solutions!

Conclusion

Activating cornering lights via fog lights on SEAT Leon using VCDS is a simple yet effective modification to improve night driving safety. By following the steps outlined in this guide, you can successfully enable this function and enjoy better road visibility.

For professional diagnostic and coding services, trust AutoExplain! We provide high-quality support to ensure your vehicle performs at its best.
👉 Get in touch with us today for expert automotive coding solutions! 🚗💡