What Causes 02071 Audi Fault Code And How To Fix It?

The 02071 Audi Fault Code signifies a “Local Databus No Signal/Communication” issue, often leading to battery drain and persistent warning lights; resolving this involves systematically diagnosing and addressing communication faults within the vehicle’s electrical system, potentially with remote support from AutoExplain. This article guides technicians through comprehensive diagnostics and efficient repair strategies, including ECU programming, ultimately enhancing service capabilities and customer satisfaction. LSI keywords: Audi electrical faults, databus communication error, car diagnostics.

1. What Does the 02071 Audi Fault Code Actually Mean?

The 02071 Audi fault code indicates a “Local Databus – No Signal/Communication” problem. This means there is a communication failure within one of the Audi’s internal networks.

• The databus system in a car acts like a central nervous system, allowing various electronic control units (ECUs) to communicate with each other. When the local databus fails, these units can no longer exchange information properly. This can lead to a variety of symptoms, depending on which systems are affected.
• Possible causes of this fault include wiring issues, faulty modules, or software glitches. Identifying the root cause involves a systematic approach to diagnostics.
• The term “local” in “Local Databus” refers to a specific, smaller network within the vehicle’s broader communication system. This could be related to comfort systems, lighting, or other specific functions.

2. What Are The Symptoms Associated With The 02071 Fault Code?

The 02071 fault code in Audi vehicles can manifest through several noticeable symptoms. Here are the most common:

• Persistent Warning Lights: One of the most common symptoms is a warning light that remains illuminated on the dashboard. This could be a general warning light or one specific to the affected system.
• Battery Drain: Communication issues can keep certain modules active even when the car is off, leading to a significant battery drain. This is frequently reported with the 02071 fault.
• Non-Functional Components: Depending on the affected databus, certain car components may stop functioning correctly. This could include interior lights, the central locking system, or other convenience features.
• Emergency Light Issues: As noted in the original problem description, the emergency light button may stay on continuously.
• Intermittent Problems: The issue may appear and disappear sporadically. It can resolve on its own for weeks, then suddenly reappear.

3. What Are The Primary Causes Of The 02071 Audi Fault Code?

Several factors can trigger the 02071 Audi fault code, typically involving communication issues within the vehicle’s databus system. Here’s a breakdown of the primary causes:

• Wiring Issues: Damaged, corroded, or poorly connected wiring is a frequent culprit. The databus relies on intact wiring to transmit signals between ECUs.
• Faulty Modules: A defective ECU connected to the local databus can disrupt communication. This could be the comfort control module, lighting module, or another related component.
• Software Glitches: Software problems within an ECU can cause it to miscommunicate or fail to communicate. This is more common in modern vehicles with complex software systems.
• Aftermarket Modifications: Installing aftermarket accessories like xenon lights or LED interior lights can sometimes interfere with the car’s electrical system and trigger the 02071 fault.
• CAN Bus Problems: The Controller Area Network (CAN) bus is a critical part of the databus system. Problems with the CAN bus itself can lead to communication failures.

4. What Diagnostic Tools Are Needed To Diagnose The 02071 Fault Code?

Proper diagnosis of the 02071 Audi fault code requires specific diagnostic tools to accurately pinpoint the source of the problem. Here’s a list of essential tools:

• OBD-II Scanner: A high-quality OBD-II scanner is essential for reading and clearing fault codes. VCDS (VAG-COM Diagnostic System) is particularly useful for Audi vehicles as it provides in-depth diagnostic information.
• Multimeter: A multimeter is used to check voltage, continuity, and resistance in the wiring and electrical components. This helps identify shorts, open circuits, and other wiring issues.
• Wiring Diagrams: Access to accurate wiring diagrams for the specific Audi model is crucial. These diagrams show the layout of the databus and the connections between various modules.
• Oscilloscope: An oscilloscope can be used to analyze the signals on the CAN bus. This can help identify signal quality issues or communication disruptions.
• Diagnostic Software: In addition to VCDS, other diagnostic software may be needed to check and update the software in various ECUs.
• Visual Inspection Tools: A flashlight and inspection mirror can help with a thorough visual inspection of wiring and connectors in hard-to-reach areas.

5. How To Diagnose The 02071 Audi Fault Code: A Step-By-Step Guide

Diagnosing the 02071 Audi fault code involves a systematic approach to identify the root cause of the communication error. Follow these steps for an effective diagnosis:

1. Initial Scan: Use an OBD-II scanner, ideally VCDS, to read all fault codes. Note all codes present, as they may provide clues about related issues. Clear the 02071 code and see if it reappears after a short test drive.
2. Visual Inspection: Start with a thorough visual inspection of all wiring and connectors related to the affected systems. Look for signs of damage, corrosion, or loose connections. Pay special attention to the wiring in areas where modifications have been made, such as aftermarket lighting installations.
3. Check Power and Ground: Use a multimeter to check the power and ground connections to the relevant ECUs. Ensure that the voltage levels are within the specified range and that the ground connections are secure.
4. CAN Bus Analysis: Use an oscilloscope to analyze the CAN bus signals. Check for proper signal voltage levels, signal integrity, and any signs of interference. Refer to the vehicle’s wiring diagrams to identify the correct CAN bus wires.
5. Module Isolation: If the CAN bus signals appear normal, try isolating individual modules to see if one is causing the communication problem. Disconnect one module at a time and recheck for the 02071 fault code. This can help pinpoint a faulty module.
6. Wiring Continuity Test: Use a multimeter to perform continuity tests on the wiring between the ECUs. Check for open circuits or shorts to ground. Refer to the wiring diagrams to ensure that all wires are properly connected.
7. Software Check: Check for software updates for the relevant ECUs. Outdated or corrupted software can sometimes cause communication problems. Use diagnostic software to update the ECU software if necessary.
8. Aftermarket Components: Disconnect any aftermarket components that have been installed, such as aftermarket xenon or LED lights. See if the 02071 fault code disappears. If it does, the aftermarket component may be interfering with the car’s electrical system.
9. Final Scan: After performing the above steps, clear all fault codes and perform a final scan to see if the 02071 code reappears. If the code is gone, the problem has been resolved. If the code persists, further diagnosis may be needed.

6. How Can Wiring Issues Contribute To The 02071 Fault Code?

Wiring issues are a significant contributor to the 02071 Audi fault code because the databus system relies on the integrity of its wiring to function correctly. Here’s how wiring problems can lead to this fault:

• Corrosion: Over time, wiring and connectors can corrode, especially in areas exposed to moisture or road salt. Corrosion increases resistance, leading to signal degradation or complete loss of communication.
• Damage: Physical damage to wiring, such as cuts, abrasions, or pinches, can disrupt the flow of signals. This damage can occur due to accidents, maintenance work, or even rodent activity.
• Loose Connections: Loose or poorly seated connectors can cause intermittent communication problems. Vibration and temperature changes can exacerbate loose connections.
• Short Circuits: A short circuit occurs when a wire comes into contact with another wire or a grounded metal surface. This can disrupt the databus signals and cause communication failures.
• Open Circuits: An open circuit occurs when a wire is completely broken, preventing the signal from flowing. This can be caused by corrosion, damage, or a broken connector.

7. What Role Do Faulty Modules Play In Triggering The 02071 Code?

Faulty modules can play a central role in triggering the 02071 code. Each module is responsible for specific functions and communicates with other modules through the databus. Here’s how faulty modules can cause the 02071 fault:

• Communication Failure: A faulty module may fail to send or receive data correctly, disrupting the communication flow on the databus. This can be due to internal hardware failures or software glitches.
• Signal Interference: A malfunctioning module can send out erroneous signals that interfere with the communication of other modules. This can cause data corruption and communication errors.
• Bus Overload: A faulty module may flood the databus with excessive data, overwhelming the system and preventing other modules from communicating.
• Incorrect Termination: Modules often include termination resistors that are essential for maintaining signal integrity on the CAN bus. A faulty module can have an incorrect termination resistance, causing signal reflections and communication problems.
• Power Issues: Internal power supply problems within a module can cause it to malfunction and disrupt communication.

8. How Do Aftermarket Modifications Affect The 02071 Fault Code?

Aftermarket modifications, especially those involving electrical components, can significantly affect the 02071 fault code. Here’s how these modifications can cause problems:

• Electrical Interference: Aftermarket components can generate electrical noise that interferes with the databus signals. This is particularly common with low-quality or poorly shielded components.
• Incorrect Wiring: Improper installation of aftermarket components can damage the vehicle’s wiring or create shorts and open circuits. This can disrupt the databus and trigger the 02071 fault.
• Increased Load: Some aftermarket components can draw excessive power, overloading the vehicle’s electrical system and causing voltage drops. This can affect the performance of ECUs and lead to communication problems.
• CAN Bus Conflicts: Some aftermarket devices may attempt to communicate on the CAN bus, potentially conflicting with the vehicle’s original modules.
• Software Compatibility: Aftermarket components may not be compatible with the vehicle’s software, leading to communication errors or even ECU damage.

9. What Steps Should Be Taken To Repair Wiring Issues Related To The 02071 Code?

Repairing wiring issues related to the 02071 code requires a meticulous approach to ensure that all problems are properly addressed. Here are the steps to take:

1. Visual Inspection: Begin with a detailed visual inspection of the wiring and connectors. Look for signs of damage, corrosion, or loose connections. Use a flashlight and inspection mirror to access hard-to-reach areas.
2. Cleaning: Clean any corroded connectors with a wire brush or contact cleaner. Ensure that all contacts are clean and free of debris.
3. Repairing Damaged Wires: Repair any damaged wires by splicing in new sections of wire. Use high-quality connectors and ensure that the splices are properly insulated to prevent shorts.
4. Replacing Connectors: Replace any damaged or corroded connectors with new ones. Ensure that the new connectors are properly crimped and seated.
5. Checking Continuity: Use a multimeter to check the continuity of each wire. Ensure that there are no open circuits or shorts to ground.
6. Securing Wires: Secure all wires and connectors to prevent them from rubbing against sharp edges or vibrating loose. Use zip ties or wiring clips to keep the wires in place.
7. Testing: After completing the repairs, perform a thorough test of the affected systems. Use an OBD-II scanner to clear any fault codes and verify that the 02071 code does not reappear.

10. What Procedures Should Be Followed To Replace A Faulty Module?

Replacing a faulty module requires careful procedures to ensure that the new module is properly installed and configured. Here are the steps to follow:

1. **Diagnosis Confirmation:** Verify that the module is indeed faulty before replacing it. Use diagnostic tools to confirm that the module is not communicating or is sending erroneous data.
2. **Part Number Verification:** Ensure that the replacement module has the correct part number for the vehicle. Using the wrong module can cause compatibility issues and may damage the vehicle's electrical system.
3. **Disconnect Battery:** Disconnect the vehicle's battery before removing the faulty module. This will prevent electrical shorts and protect the vehicle's electrical system.
4. **Module Removal:** Carefully remove the faulty module, taking care not to damage any wiring or connectors. Note the orientation of the module and the location of each connector.
5. **Module Installation:** Install the new module, ensuring that all connectors are properly seated and that the module is securely mounted.
6. **Coding and Programming:** Code and program the new module using diagnostic software. This may involve entering the vehicle's VIN, setting various parameters, and performing adaptation procedures.
7. **Testing:** After coding and programming the new module, perform a thorough test of the affected systems. Use an OBD-II scanner to clear any fault codes and verify that the 02071 code does not reappear.
8. **Final Verification:** Conduct a test drive to ensure that all systems are functioning correctly. Monitor the vehicle's performance and check for any unusual behavior.

11. How Does Software Programming Resolve The 02071 Fault Code?

Software programming can resolve the 02071 fault code by addressing software-related issues within the vehicle’s ECUs. Here’s how software programming can help:

*   **Updating Software:** Outdated or corrupted software can cause communication problems between ECUs. Updating the software to the latest version can resolve these issues.
*   **Recoding Modules:** In some cases, modules may need to be recoded to ensure that they are properly configured for the vehicle. This is particularly important when replacing a module or making changes to the vehicle's equipment.
*   **Flashing ECUs:** Flashing an ECU involves replacing the existing software with a new version. This can be necessary to fix bugs, improve performance, or add new features.
*   **Adaptation Procedures:** Adaptation procedures are used to calibrate certain components, such as sensors or actuators. This ensures that the components are working correctly and communicating properly with the ECUs.
*   **Clearing Fault Codes:** After performing software programming, it is important to clear any fault codes that may be present. This will ensure that the vehicle's systems are functioning correctly and that the 02071 code does not reappear.

12. What Is The Role Of The CAN Bus In The 02071 Fault Code?

The CAN bus (Controller Area Network) plays a critical role in the 02071 fault code, as it is the primary communication network within the vehicle. Here’s a detailed look at its role:

*   **Communication Backbone:** The CAN bus serves as the backbone for communication between the vehicle's ECUs. It allows modules to exchange data and coordinate their functions.
*   **Signal Integrity:** The CAN bus relies on signal integrity to ensure that data is transmitted correctly. Issues such as voltage drops, signal reflections, or interference can disrupt communication and trigger the 02071 fault.
*   **Termination Resistors:** The CAN bus includes termination resistors at each end of the network. These resistors help to prevent signal reflections and maintain signal integrity. If a termination resistor is faulty or missing, it can cause communication problems.
*   **Bus Load:** The CAN bus has a limited capacity for data transmission. If the bus is overloaded with excessive data, it can cause communication failures and trigger the 02071 fault.
*   **Physical Layer Issues:** Physical layer issues, such as damaged wiring, corroded connectors, or loose connections, can disrupt the CAN bus and cause communication problems.

13. What Are The Common Mistakes To Avoid When Diagnosing The 02071 Code?

When diagnosing the 02071 code, avoiding common mistakes can save time and prevent misdiagnosis. Here are some pitfalls to watch out for:

*   **Ignoring Basic Checks:** Skipping basic checks, such as visual inspections of wiring and connectors, can lead to overlooking simple problems.
*   **Relying Solely On Fault Codes:** Fault codes provide a starting point, but they don't always pinpoint the exact cause of the problem. Relying solely on fault codes can lead to misdiagnosis.
*   **Not Verifying Power and Ground:** Failing to verify power and ground connections to the ECUs can result in overlooking power-related issues that can cause communication problems.
*   **Neglecting Aftermarket Components:** Overlooking aftermarket components can lead to misdiagnosis, as these components can sometimes interfere with the vehicle's electrical system.
*   **Assuming Module Failure:** Assuming that a module is faulty without proper testing can lead to unnecessary module replacements.
*   **Not Checking Wiring Diagrams:** Failing to consult wiring diagrams can make it difficult to trace circuits and identify wiring issues.
*   **Skipping Software Checks:** Neglecting to check for software updates can lead to overlooking software-related issues that can cause communication problems.
*   **Not Isolating Modules:** Failing to isolate modules can make it difficult to pinpoint a faulty module that is causing the communication problem.

14. How Can Remote Diagnostics Assist In Resolving The 02071 Fault?

Remote diagnostics can provide significant assistance in resolving the 02071 fault by leveraging expert knowledge and advanced diagnostic tools from a remote location. Here’s how:

*   **Expert Guidance:** Remote diagnostics provide access to experienced technicians who can guide you through the diagnostic process. These experts can offer valuable insights and help you avoid common mistakes.
*   **Advanced Tools:** Remote diagnostic services often have access to advanced diagnostic tools that may not be available locally. These tools can provide in-depth analysis of the vehicle's systems and help pinpoint the root cause of the problem.
*   **Software Programming:** Remote technicians can perform software programming and coding remotely, eliminating the need to visit a dealership or specialized repair shop.
*   **Real-Time Support:** Remote diagnostics provide real-time support, allowing you to ask questions and get immediate answers. This can save time and prevent frustration.
*   **Cost Savings:** Remote diagnostics can often be more cost-effective than traditional diagnostic methods. You can avoid the expense of towing the vehicle to a repair shop and paying for labor hours.

15. How To Prevent The Recurrence Of The 02071 Audi Fault Code?

Preventing the recurrence of the 02071 Audi fault code involves proactive maintenance and careful attention to the vehicle’s electrical system. Here are some key steps to take:

*   **Regular Inspections:** Perform regular inspections of the vehicle's wiring and connectors. Look for signs of damage, corrosion, or loose connections.
*   **Proper Maintenance:** Follow the manufacturer's recommended maintenance schedule. This includes replacing worn components and performing necessary software updates.
*   **Quality Components:** Use high-quality replacement parts and components. Avoid using cheap or low-quality parts, as they can cause problems in the future.
*   **Professional Installation:** Have aftermarket components installed by a qualified technician. This will ensure that the components are properly installed and do not interfere with the vehicle's electrical system.
*   **Protect Wiring:** Protect the vehicle's wiring from damage. Use zip ties or wiring clips to keep the wires in place and prevent them from rubbing against sharp edges.
*   **Avoid Moisture:** Avoid exposing the vehicle's electrical system to moisture. Park the vehicle in a dry place and avoid driving through deep water.
*   **Software Updates:** Keep the vehicle's software up to date. Check for software updates regularly and install them as needed.
*   **Monitor Performance:** Monitor the vehicle's performance and watch for any unusual behavior. If you notice any problems, have them addressed promptly.

16. What Are The Costs Associated With Repairing The 02071 Fault Code?

The costs associated with repairing the 02071 fault code can vary widely depending on the cause of the problem and the extent of the repairs needed. Here are some potential costs to consider:

*   **Diagnostic Fees:** Diagnostic fees can range from $75 to $150, depending on the shop and the complexity of the diagnosis.
*   **Wiring Repairs:** Wiring repairs can cost from $100 to $500, depending on the extent of the damage and the labor involved.
*   **Module Replacement:** Module replacement can cost from $200 to $1000 or more, depending on the module and the labor involved.
*   **Software Programming:** Software programming can cost from $50 to $300, depending on the shop and the complexity of the programming.
*   **Aftermarket Component Removal:** Removing aftermarket components can cost from $50 to $200, depending on the component and the labor involved.
*   **Remote Diagnostic Services:** Remote diagnostic services can cost from $50 to $200 per session, depending on the service and the length of the session.

17. Why Choose AutoExplain.Com For Diagnosing And Repairing The 02071 Fault Code?

Choosing AutoExplain.com for diagnosing and repairing the 02071 fault code offers numerous advantages, making the process more efficient and effective. Here’s why AutoExplain.com stands out:

*   **Expert Technicians:** AutoExplain.com provides access to experienced and certified technicians who specialize in Audi vehicles. These experts have in-depth knowledge of the 02071 fault code and can provide accurate diagnoses and effective repair solutions.
*   **Remote Diagnostic Capabilities:** AutoExplain.com offers remote diagnostic services that allow technicians to diagnose and repair the 02071 fault code from a remote location. This can save time and money by eliminating the need to visit a repair shop.
*   **Advanced Tools:** AutoExplain.com uses advanced diagnostic tools and software to accurately diagnose the 02071 fault code. These tools provide in-depth analysis of the vehicle's systems and help pinpoint the root cause of the problem.
*   **Software Programming Services:** AutoExplain.com offers software programming services to update, recode, and flash ECUs. This can resolve software-related issues that can cause the 02071 fault code.
*   **Cost-Effective Solutions:** AutoExplain.com provides cost-effective solutions for diagnosing and repairing the 02071 fault code. Remote diagnostic services can often be more affordable than traditional diagnostic methods.
*   **Real-Time Support:** AutoExplain.com offers real-time support, allowing you to ask questions and get immediate answers. This can save time and prevent frustration.
*   **Comprehensive Solutions:** AutoExplain.com provides comprehensive solutions for diagnosing and repairing the 02071 fault code. This includes identifying the cause of the problem, providing repair recommendations, and performing the necessary repairs.

18. How To Contact AutoExplain.Com For Assistance With The 02071 Fault Code?

For assistance with the 02071 fault code, AutoExplain.com offers multiple convenient ways to get in touch with their expert team:

*   **WhatsApp:** Reach out via WhatsApp at (+84)967469410 for immediate support and quick responses.
*   **Email:** Send an email to [email protected] with detailed information about your issue for a comprehensive response.
*   **Website:** Visit AutoExplain.com to explore their range of services and access additional resources.
*   **Office Address:** For in-person inquiries, their office is located at 1500 N Grant ST Sten Denver, CO 80203.

By contacting AutoExplain.com through any of these channels, you can receive expert assistance and guidance to resolve the 02071 fault code efficiently.

19. What Training Programs Does AutoExplain.Com Offer For Automotive Technicians?

AutoExplain.com offers a range of training programs designed to enhance the skills and knowledge of automotive technicians. These programs cover various topics, including diagnostics, software programming, and module repair. Here are some of the training programs offered:

*   **Diagnostic Training:** Diagnostic training programs provide technicians with the skills and knowledge needed to accurately diagnose automotive problems. These programs cover topics such as fault code analysis, wiring diagrams, and diagnostic tools.
*   **Software Programming Training:** Software programming training programs teach technicians how to update, recode, and flash ECUs. These programs cover topics such as software programming tools, coding procedures, and adaptation procedures.
*   **Module Repair Training:** Module repair training programs provide technicians with the skills and knowledge needed to repair faulty modules. These programs cover topics such as module disassembly, component replacement, and soldering techniques.
*   **Custom Training Programs:** AutoExplain.com also offers custom training programs tailored to the specific needs of automotive technicians. These programs can cover any topic related to automotive diagnostics and repair.

20. What Are The Benefits Of Using AutoExplain.Com’s Remote Support Services?

Using AutoExplain.com’s remote support services offers numerous benefits for automotive technicians, making diagnostics and repairs more efficient and effective. Here are some key advantages:

*   **Expert Guidance:** Gain access to experienced technicians who provide expert guidance throughout the diagnostic and repair process.
*   **Cost Savings:** Reduce costs associated with traditional diagnostic methods, such as towing the vehicle to a repair shop and paying for labor hours.
*   **Time Savings:** Save time by leveraging remote diagnostics, which eliminates the need for physical inspections and reduces downtime.
*   **Advanced Tools:** Utilize advanced diagnostic tools and software remotely, providing in-depth analysis and precise troubleshooting.
*   **Real-Time Support:** Receive real-time support, allowing for immediate answers to questions and quick resolution of issues.
*   **Software Programming:** Access remote software programming services to update, recode, and flash ECUs without needing specialized equipment on-site.
*   **Comprehensive Solutions:** Obtain comprehensive solutions, including problem identification, repair recommendations, and execution of necessary repairs.
*   **Improved Efficiency:** Enhance overall efficiency in the diagnostic and repair process, allowing technicians to handle more cases and improve customer satisfaction.

FAQ: 02071 Audi Fault Code

1. What exactly does the 02071 fault code mean?
The 02071 fault code indicates a “Local Databus – No Signal/Communication” problem, meaning there is a communication failure within one of the Audi’s internal networks, such as those for comfort systems or lighting.

2. What are the most common symptoms associated with the 02071 fault code?
Common symptoms include persistent warning lights on the dashboard, battery drain, non-functional components (like interior lights), and issues with the emergency light button.

3. What are the primary causes of the 02071 Audi fault code?
The primary causes include wiring issues (damaged, corroded), faulty modules (ECUs), software glitches, aftermarket modifications interfering with the electrical system, and CAN bus problems.

4. What diagnostic tools are needed to diagnose the 02071 fault code effectively?
Essential tools include an OBD-II scanner (preferably VCDS), a multimeter, wiring diagrams, an oscilloscope, and diagnostic software for checking and updating ECU software.

5. How do aftermarket modifications affect the 02071 fault code?
Aftermarket modifications, especially electrical ones, can cause electrical interference, incorrect wiring, increased load on the electrical system, CAN bus conflicts, and software incompatibility.

6. What steps should be taken to repair wiring issues related to the 02071 code?
Repairing wiring issues involves visual inspection, cleaning corroded connectors, repairing damaged wires, replacing connectors, checking continuity, and securing wires to prevent further damage.

7. How can software programming resolve the 02071 fault code?
Software programming can resolve the 02071 code by updating outdated software, recoding modules, flashing ECUs to fix bugs, and performing adaptation procedures.

8. What is the role of the CAN bus in the 02071 fault code?
The CAN bus is the primary communication network, so it maintains the signal integrity. Issues such as voltage drops, signal reflections, or interference can disrupt communication and trigger the 02071 fault.

9. What are the common mistakes to avoid when diagnosing the 02071 code?
Common mistakes include ignoring basic checks, relying solely on fault codes, not verifying power and ground, neglecting aftermarket components, and assuming module failure without proper testing.

10. How can AutoExplain.com assist in resolving the 02071 fault remotely?
AutoExplain.com offers expert technicians, remote diagnostic capabilities, advanced tools, software programming services, cost-effective solutions, and real-time support to diagnose and repair the 02071 fault code efficiently.

Don’t let the 02071 fault code drain your battery and your patience! Contact AutoExplain.com today for expert remote diagnostic and repair services. Reach us via WhatsApp at (+84)967469410 or email us at AutoExplain[email protected]. Let us help you get your Audi back on the road quickly and efficiently.